Mercury Product Protection
- Provides up to eight years of total coverage for your engine. (Mercury Limited Warranty + Product Protection)
- A factory-backed extended service contract, Mercury Product Protection is administered 100% by Mercury Marine
- Is non-declining coverage. The value of the coverage does not decrease over the life of the contract.
- Is transferable to subsequent owners, which typically increases the resale value of your engine.
- Must be purchased before your engine’s Mercury Limited Warranty expires. Once purchased, Mercury Product Protection coverage takes effect the day the Mercury Limited Warranty expires.
Two Levels of Coverage
- Gold Level coverage protects against mechanical failures.
- Platinum Level coverage protects against mechanical and electrical failures.
Coverage can be purchased within the Factory Mercury Limited Warranty period as long the model was originally manufactured in the current and four proceeding calendar years. Coverage amount adheres to the suggested list price for your Mercury product at the time of the original sale and not the current ABOS Blue Book value. The plan is available for consumers that are residents of the United States or Canada and boat in the United States or Canada. Engines must be used for recreational purposes and have fewer than 500 accumulated engine hours (at time of purchase). Our contract specifically excludes any commercial professional, not-for-profit, work-related, local, state, or federal government use, or used product imported from outside the United States or Canada. You can check to see if your engine is eligible for a Mercury Product Protection Plan by contacting your local Mercury dealer.
Gold Level | Platinum Level | |
---|---|---|
Parts, Accessories and Labor Coverage Comprehensive component coverage (including labor) for mechanical failures caused by a defect in material or workmanship – similar to the Mercury Limited Warranty. |
||
Service Under the Plan Factory-authorized service is available at more than 3,600 Mercury dealers in the United States and Canada. You're not restricted to the dealer who sold you the plan. |
||
Genuine Factory Replacement Parts 100% Mercury and Quicksilver® replacement parts. No “will fit” substitutes. |
||
Electrical Failures Comprehensive coverage (including labor) electrical failures caused by a defect in material or workmanship – similar to the Factory Limited Warranty. |
||
Mercury Accessory Coverage Covers all Mercury and Quicksilver engine-related accessories such as steering fixtures, remote controls and miscellaneous instrumentation (except propellers). |
||
On Water Tow-In Allowance Provides up to $200 per claim occurrence toward the cost of on-water towing charges necessary to perform approved repairs to covered products. |
||
Hoist/Haul-Out Allowance Provides up to $200 per claim occurrence to perform approved repairs to covered products on non-trailerable boats (26 feet in length or greater). |
||
Transferability Transferable to a subsequent recreational-use purchaser within 30 business days from the date of sale. Engines not purchased directly from another recreational-use owner or from an Authorized Mercury or MotorGuide dealer are ineligible for coverage. |
||
Guaranteed Satisfaction If you're not completely satisfied for any reason during the first 30 days, you may cancel your contract.* |
Factory Limited Warranty | Gold Level | Platinum Level | |
---|---|---|---|
Engine | |||
Camshaft and Camshaft Bearings |
|||
Circulatory Water Pump (MC Engine) |
|||
Connecting Rods and Bolts |
|||
Crankshaft |
|||
Cylinder Block |
|||
Cylinder Head |
|||
Engine Heads |
|||
Flywheel and Ring Gear |
|||
Guides and Seats |
|||
Harmonic Balancer |
|||
Adaptor Plate |
|||
Intake and Exhaust Manifolds |
|||
Lifters |
|||
Main Bearings |
|||
Oil Pan |
|||
Oil Pump |
|||
Oil Pump Drive Gear |
|||
Piston Rings |
|||
Piston Wrist Pins |
|||
Pistons |
|||
Reeds and Reed Blocks |
|||
Rocker Arm Covers |
|||
Rocker Arms |
|||
Supercharger |
|||
Timing Chains or Timing Gears |
|||
Timing Gear Cover |
|||
Valves and Valve Train |
|||
Trim Systems | |||
Trim Cylinder(s) |
|||
Trim Motor |
|||
Solenoid(s) |
|||
Trim Limit Switch |
|||
Trim Position Sender |
|||
Wiring Harness |
|||
Fuel Systems | |||
Air Compressor |
|||
Flame Arrestor |
|||
Fuel Cooler |
|||
Float Switch |
|||
Fuel Delivery Pump |
|||
Fuel Injection Pump |
|||
Fuel / Air Injector(s) |
|||
Transmission | |||
Bearings |
|||
Gears |
|||
Shafts |
|||
Shift Mechanism |
|||
Transmission Case |
|||
Jet Drive Components | |||
Nozzle |
|||
Reverse Gate |
|||
Rudder |
|||
Stator |
|||
Steering Lever |
|||
Wear Ring |
|||
Lower Unit / Gear Case | |||
Bearing Carrier | |||
Bearings | |||
Drive Shaft | |||
Drive Shaft Housing | |||
Gears | |||
Internal Shift Components |
|||
Propeller Shaft | |||
Electrical / Ignition | |||
Alternator |
|||
Armature |
|||
Actuators |
|||
CDM Module |
|||
Distributor Housing, Shaft and Gear |
|||
Electronic Boost Control (EBC) |
|||
Electronic Control Unit (ECU) |
|||
Electronic Throttle Control (ETC) |
|||
Enricher Valve |
|||
Idle and Advance Modules |
|||
Ignition Stator |
|||
Ignitions Coil(s) |
|||
Rectifier |
|||
RPM Limiter |
|||
Sensors |
|||
Solenoid(s) |
|||
Starter Motor |
|||
Switch Box(es) |
|||
Switches |
|||
Trigger(s) / Amplifier |
|||
Voltage Regulator |
|||
Warning Horns and Modules |
|||
Wiring Harness |
|||
Gimbal Housing | |||
Bell Housing |
|||
Gimbal Bearing |
|||
Gimbal Housing |
|||
Gimbal Ring |
|||
Shift Cable |
|||
Transom Plate |
|||
Mercury Precision / Quicksilver Steering | |||
Power Steering Cylinder |
|||
Rack and Yoke |
|||
Steering Attaching Kit |
|||
Steering Cable |
|||
Steering Control Helm |
|||
Power Steering Pump |
|||
JPO / JPS Components |
|||
Swivel Pin and Arm | |||
Joystick |
|||
Lubricating System | |||
Oil Injection Check Valve |
|||
Drive Gear and Shaft |
|||
Oil Injection Pump |
|||
Mercury Precision / Quicksilver Controls and Instruments | |||
Axius Components |
|||
Digital Throttle / Shift |
|||
Emergency Stop Switch |
|||
Horns and Alarms |
|||
MerCathode |
|||
Power Shift Components |
|||
Rigging |
|||
Remote Control |
|||
Analog Gauges |
|||
SmartCraft Gauges & VesselView |
|||
Shift Cable |
|||
Switches |
|||
Throttle Cable |
|||
Tiller Handle |
|||
Wiring Harness |
|||
Additional Benefits | |||
On-Water Towing (up to $200 per claim occurrence) |
|||
Hoist / Haul Out (up to $200 for boats 26' or larger) |
|||
Program Guidelines | |||
$50 Deductible |
|||
Transferability * |
|||
NOTE: This Comparison Chart is not a governing document. Please review the Mercury Product Protection 'Plan Benefits & Provisions' statement for specific coverages and exclusinos. These plans are available for purchase with options to extend or upgrade depending on your current coverage.* *Restrictions apply. See requirements in the Plan Benefits and Provisions. |
Service and Claims
With Mercury Product Protection there are no claims adjustors or inspectors to work with to determine the cause of failure. In fact, the claims process is exactly the same as the process for the Mercury Limited Warranty.
- Claims are paid through the dealership so you never pay for the repair or wait for reimbursement.
- MPP has a $50 deductible per claim.
The contract is between you and Mercury Marine, so you can have your engine serviced at any of more than 3,600 authorized Mercury dealers in the United States and Canada. At an authorized Mercury service center, a qualified Mercury Service Technician will assess the failure and process the claim through Mercury Marine. You can check to see if your engine is eligible for a Mercury Product Protection plan by contacting your local Mercury dealer.
Transferability
Mercury Product Protection is fully transferable to subsequent recreational-use owners, typically increasing product value at resale or trade.
Our Gold and Platinum contracts are transferable to a subsequent recreational-use purchaser within 30 business days from the date of sale. Engines not purchased directly from another pleasure-use owner or from an Authorized Mercury or MotorGuide dealer are ineligible for coverage.
Mercury Product Protection Transfer Requirements:
- Completed Transfer form
- Copy of the Bill of Sale/Receipt, including the engine serial number and date of sale (a blank bill of sale is provided below)
- Transfer fee per the fee schedule provided on the Transfer Form
Get the full value of an inspected, refurbished Mercury engine without the worry of buying used. The Mercury Certified Pre-Owned Protection Program lets you purchase one or two years of extended service on eligible engines. See your authorized Mercury dealer for more information.
The first factory-backed extended service program in the industry applies to new and remanufactured powerheads and long blocks purchased from an authorized Mercury dealer.
Confidence Is Priceless
Mercury Product Protection is administered and backed by us – no need to deal with independent providers or insurance companies. After all, no one knows your engine better than the people who made it.
For more information, contact your local Mercury Dealer or Mercury Product Protection at 888-427-5373 or [email protected].
Have additional questions? Read our FAQ