Dockline Blog

Boating is one of the most demanding environments in which an engine can operate. Marine engines frequently run for extended periods of time at high rpm or wide-open throttle, often in corrosive saltwater. When not on the water, marine engines often ...

Winterizing is Really Important Correctly preparing your outboard motor for the off-season will help insure that it’s ready to go next spring. In cold climates, freezing weather can cause costly damage to an engine that isn’t winterized properly. Even in ...

Safe boating is the responsibility of everyone on the water, and it starts with making sure you have enough life jackets of the proper type and size for everyone on board. This isn’t an area to cut corners. The best ...

The Lanyard Stop Switch is a simple but extremely effective on-board safety device designed to shut off a boat’s engine if the operator moves away (as in accidental ejection) from the operator’s position. The Lanyard physically connects the operator to ...

The bolts that secure your outboard to your boat’s transom endure tremendous stress when the boat is underway and even when the boat is being trailered. Those bolts are critically important, so don’t neglect them. Loose transom bolts can “wallow ...

Your batteries are among the most critical components of your boat. Neglect them, and you do so at your own peril; if they aren’t functioning properly, your boat’s going nowhere under its own power. Fortunately, it takes just a few ...

One of the key factors in being a successful do-it-yourselfer of any kind is knowing what you can handle and what’s best left to a professional. Fortunately, checking and topping off the power trim fluid on your Mercury outboard is ...

Step 1 Wipe down the cowl with a damp cloth to remove water spots and dirt. Step 2 Using a clean, dry cloth, continue to wipe the cowl removing any dampness. Step 3 Using a clean, dry cloth, apply Cowl ...