65-80hp

Get to the Fish, Fast.

Made for speed in shallow water.

Engine Information and Specifications

Select Horsepower

80 65

Compare Outboard Motors

Specifications - 80

HP / kW	80 / 59.2
Engine type	8-valve single overhead cam (SOHC) Inline 4
Displacement (CID/CC)	126
Displacement (L)	2.1
Full throttle RPM	5000-6000
Air induction	Performance-Tuned Scroll Intake Manifold
Fuel induction system	Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Alternator amp / Watt	35 amp / 441 watt with water-cooled voltage regulator
Recommended fuel	Unleaded 90RON minimum
Recommended oil	Mercury FourStroke Oil 10W-30
Engine protection operator warning system	SmartCraft Engine Guardian
Compatible with SmartCraft digital technology	Yes
Starting	Smart Start Electric
Controls	Mechanical throttle & shift
Steering	Big Tiller Compatible Dual cable mechanical Hydraulic
Shaft length	20" / 508 mm
Gearcase ratio	1.00:1
Dry weight *Lightest model available	165 kg
Bore and stroke	3.5 x 3.2" / 90 x 81 mm
Ignition	SmartCraft ECM 70 Digital Inductive
Cooling system	Water-cooled with thermostat
Gear shift	F-N-R
Gearcase options	Jet Drive
Trim system	Power Tilt Power Trim
Exhaust system	Through jet
Shallow water trim range (degrees)	20
Color	Phantom Black
Lubrication system	Integrated Dry Sump
Oil Capacity	5.5 qts / 5.2 l
Maximum Trim Range	22° (-6° to 16°)
Maximum Tilt Range	70° (-6° to 64°)

See All Specs

Find a Dealer Today

Specifications - 65

HP / kW	65 / 48.1
Engine type	8-valve single overhead cam (SOHC) Inline 4
Displacement (L)	2.1
Full throttle RPM	5000-6000
Air induction	Performance-Tuned Scroll Intake Manifold
Fuel induction system	Computer Controlled Multi-Port Electronic Fuel Injection (EFI)
Alternator amp / Watt	35 amp / 441 watt with water-cooled voltage regulator
Recommended fuel	Unleaded 90RON minimum
Recommended oil	Mercury FourStroke Oil 10W-30
Engine protection operator warning system	SmartCraft Engine Guardian
Compatible with SmartCraft digital technology	Yes
Starting	Smart Start Electric
Controls	Mechanical throttle & shift
Steering	Big Tiller Dual cable mechanical Hydraulic
Shaft length	20" / 508 mm
Gearcase ratio	1.00:1
Dry weight *Lightest model available	165 kg
Bore and stroke	3.5 x 3.2" / 90 x 81 mm
Ignition	SmartCraft ECM 70 Digital Inductive
Cooling system	Water-cooled with thermostat
Gear shift	F-N-R
Gearcase options	Jet Drive
Trim system	Power Tilt Power Trim
Exhaust system	Through jet
Shallow water trim range (degrees)	20
Color	Phantom Black
Lubrication system	Integrated Dry Sump
Oil Capacity	5.5 qts / 5.2 l
Maximum Trim Range	22° (-6° to 16°)
Maximum Tilt Range	70° (-6° to 64°)

See All Specs

Find a Dealer Today

Mercury jet-drive outboards

Mercury® jet-drive outboards are specifically designed to pilot boats in shallow waters where propeller-driven hulls are unable to operate. Because there's no lower unit extending below the hull, the jet drive permits passage over obstacles that would restrict access to a propeller-driven outboard boat.

The Big Tiller.

The optional center-mounted Big Tiller offers optimal control. A longer tiller grip incorporates a convenient power trim switch, the shift lever is close at hand, and an optional digital troll control adjusts engine speed as low as 700 rpm in 10-rpm increments.